Canon MP Printer Error E27-145
A few days ago I was having problems at the printer 3 in 1 Canon MP-145, this printer is fairly robust in durability, because I use since 2008 until now (2011), in addition to almost every day using this printer, I also do not using Infusion System (modifying the tube outside the printer using the printer who contacted the hose into the cartridge / ink spot, aim to facilitate the filling of ink) on this printer, the Infusion System is the same, only when using the Infusion System to facilitate the charging ink and do not need close the printer cover is opened and no lift to fill the ink cartridge, but my advice is if the printer is not under 1 year old or, better not be modified, because the warranty is not valid if the printer can be modified, but it all depends on you and your needs.
A common error occurs
Back kepokok problem, the erorr occurring in general in this printer is the E27 (Waste Ink Full) or ink shelters are full, you do not need to panic, you can still use the printer in a way to manually reset it and I have proved in my printer , the following ways:
==================================
A. Press and hold the Stop / Reset (Power cable remains attached)
2. Press and hold the Power button (button Stop / Reset remains pressed)
3. Press the Power button, then release the Reset / Stop
4.Tekan Button Reset / Stop 2x without a pause, then release the power button
Wait until the number "0" appears on the screen
5. Press the Stop / Reset 1x
6. Press the Power button 1x, the printer will print a sheet of paper
7.Tekan button Stop / Reset 2x
8. Press the Power button 1x, the printer will print a sheet of paper
9. Press the Stop / Reset 3x
10.Tekan Power button 1x (no printing process)
11. Press the Stop / Reset 4 times
12. Press the Power button 1x a bit long and off (to turn off the printer)
"If the printer still does not get turned off, unplug the printer power cable"
13. Turn on the printer
14. E27 erorr message is lost and the printer is running normally
